home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ultimate Blitz Basic 2.1
/
Ultimate Blitz Basic 2.1 (1997)(Acid Software).iso
/
readme_first
< prev
next >
Wrap
Text File
|
1997-10-13
|
3KB
|
130 lines
Welcome to Blitz Basic CD:
The Blitz Basic CD contains the following:
Blitz Basic v2.1
Blitz Extras
Blitz Example
Blitz Basic Manual (Ready to Print)
Blitz Basic Guide (Explains all Blitz Basic Commands)
BUI Magazine (Blitz User International).
* Tutorials
* Latest source code
* Tools
* New Third Party libs, etc.
* 7 Disk full of Blitz Mania
* Full back-up and Technical Support
Blitz Support Suite:
* SuperTed
* RedDebugger
* RedShapez
* RedMapEditor
* RedBlitzLibs
Internet:
Latest software from the Internet.
Shareware:
Here is a great Shareware program, I compiled in Blitz Basic, to show what
can be done in Blitz Basic. If you would like the full Blitz source send
me a Cheque for UK 10 Pounds Payable to Kevin Winspear. Send to:
Kevin Winspear
BUI
10 Colenso Street
Hartlepool
Cleveland
TS26 9BD.
*************************************
The Blitz Support Suite
1996 Red When Excited Ltd
Thank You for buying the Blitz Support Suite. We hope you'll find this
prcduct to be a usefu and productive add-on for Blitz Basic 2.
Installation:
The installation process for the Blitz Support Suite uses the standard
Amiga Installer program, which is provided for your convenience.
To begin the Installation process:
1. Boot your marchine as normal (if you don't have a hard-drive, you should
boot from your Workbench disk).
2. Double-click the 'BSS1' disk Icon when it appears on the Workbench screen
3. Inside the 'BSS1' window', double click the 'Install' icon and follow
on-screen, prompts.
To install the Blitz Support Suite you will need Blitz Basic 2 v1.9 or later
(Which is on this CD) - you will be asked which version of Blitz 2 you have
at the start of the Installation process, You will also be given an
opportunity to selectively install Blltz Support Suite program modules.
N.B. If your Amiga has 2Mb of RAM or less, you may have to quit any
applications to install the Blitz Support Suite.
System Requirements:
To use the Blitz Support Suite fully you must have a hard-drive with
approximately 5Mb of free space.
Certain programs in the Blitz Support Suite (e.g., REDMapEditor, REDShapeZ
and SuperTED) can be run from floppy disk, though their performance may be
limited. REDDebugger and REDBlitzLibs cannot be run from floppy disk due to
space constraints. You will also need a minimum of 2Mb of RAM to use the
Blitz Support Suite. As is the case with many development tools, the more
RAM you nave, the better. If you have less than 2Mb of RAM, you should not
install REDBlitzLibs or REDDebugger.
Contact Addresses:
If you have any problems with this software, please contact us at the
following address:
Red When Excited Ltd,
67 Farringdon Road,
Havant,
Hants.
P09 2LP
ENIGLAND
E-Mail:redwhenr@ldngedge.demon.co.uk
WWW: http://www.ldngedge.demon.co.uk
DO NOT RING THE "BLITZ INSTALLATION SUPPORT", CONTACT US.
-- THANK YOU --
*************************************
This CD was compiled by Kevin Winspear / BUI (Blitz User International).
Blitz Installation Support (Office Hours 9am - 5pm ONLY)
+44 (0)1429 266413
Email: kevv@Globalnet.co.uk
© Guildhall Leisure Services Ltd
Unit 15
Guildhall Industrial Estate
Kirk Sandall
Doncaster
South Yorkshire
DN3 1QR
ENGLAND.
+44 (0)1302 890000
*************************************